OFA Kameleon wRF UG rev 3.fm Page 27 Monday, September 13, 2004 11:18 AM

USERS GUIDE

OPTIMIZING IR/RF BASE STATION RECEPTION

Here are some adjustment tips for optimizing the operation of your IR/RF Base Station:

Aim the OFA Kameleon 8-Device Remote with RF toward the room where the IR/RF Base Station is located.

Do not position the IR/RF Base Station near metal objects, such as heat ducts. Metal can absorb RF signals.

Make sure the batteries in the OFA Kameleon 8-Device Remote with RF are fully charged. Try replacing them if you are not sure (see “Installing Batteries” on page 4). Weak batteries will affect the signal range.

Make sure that the OFA Kameleon 8-Device Remote with RF is not being affected by other RF transmissions (e.g., garage door openers, cordless telephones, etc.).

NOTE: The tests for range limits of the OFA Kameleon 8-Device Remote with RF and the IR/RF Base Station were conducted in open-air distance tests. Actual signal distance will be based on the construction of the building the unit is being used in, as well as other factors, such as outside interference.

CHANGING VOLUME LOCK

The OFA Kameleon 8-Device Remote with RF is set at the factory for independent volume control of each selected device.

However, you may change the Volume Lock setting to Global Volume Lock so that a device’s volume is locked to one mode (e.g., to control TV volume in all other modes). After that you can perform Individual Volume Unlock on a selected device to set its volume control for independent operation.

LOCKING VOLUME CONTROL TO ONE MODE (GLOBAL VOLUME LOCK)

1.Press and hold SETUP until the two bottom IR

segments flash twice. The Program Keys appear as SETUP flashes repeatedly.

 

Changing Volume Lock

27

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 27
Image 27
One for All URC-9964B00 manual Changing Volume Lock, Optimizing IR/RF Base Station Reception