One for All URC-9964B00 Using Macros, Unlocking ALL Volume Control Restoring Default Setting

OFA Kameleon wRF UG rev 3.fm Page 29 Monday, September 13, 2004 11:18 AM

USER’S GUIDE

4.If desired, repeat steps 2 through 3 (of this section) for each device that you want volume to be unlocked.

5.To exit programming, press HOME once.The display returns to the last- selected device menu screen.

6.Now, after you select a device that has volume unlocked, pressing

VOL , VOL , or MUTE controls the device’s volume only in its own mode.

UNLOCKING ALL VOLUME CONTROL (RESTORING DEFAULT SETTING)

1. Press￿and hold￿SETUP until the two bottom IR

segments flash twice. The Program Keys appear as SETUP flashes repeatedly:

2.Press VOL once.The Volume Lock programming screen appears:

3.Press VOL once.The two bottom IR

segments flash￿four times and the Program Keys appear again.

4. To exit programming, press HOME once.The display returns to the last- selected device menu screen.

5. Volume is again independently controlled according to its default states for all programmed devices.

USING MACROS

The OFA Kameleon 8-Device Remote with RF includes five Macro Keys, M1 through M4 and POWER. Each one can be set up to perform a repetitive, time- consuming operation with the press of a single key.

NOTE: . A macro programmed onto the POWER key can only be accessed in the HOME THEATER mode. Pressing it in any other mode only sends a “Power On/ Off” IR command to the selected device.

Using Macros 29