35
TROUBLESHOOTING
No Power
•Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again.
•Check that the outlet is not on a wall switch.
•Be sure the fuse is not blown on the AC power strip, if one is being used.
No Picture
•Check antenna connections. Are they properly secured to the TV's ANT 75Ω plug?
•Check the TUNER MODE control for the correct tuner setting.
•Try running the Auto Program feature to find all available channels.
•Press the AV button on the remote to make sure the correct signal source is selected (FRONT or Current Channel).
No Sound
•Check the VOLUME buttons.
•Check the MUTE button on the remote control.
•If you’re attempting to hook up auxiliary equipment, check the audio jack connections located on the front of the TV.
Remote Does Not Work
•Check the batteries. If necessary, replace them with AA Heavy Duty (Zinc Chloride) or Alkaline batteries.
•Clean the remote control and the remote control sensor window on the TV.
•Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again.
•Be sure the fuse is not blown on the AC power strip, if one is being used.
•Check to be sure the TV outlet is not on a wall switch.
TV Displays Wrong Channel or No Channels Above 13
•Repeat channel selection.
•Add the desired channel numbers (using the CHANNEL EDIT control) into the TV’s memory.
•Check to be sure the TUNER MODES are set to the CABLE option and run the Auto Program feature to find all available channels.
