Panasonic AW-E800 manual Reset to 3 200K or 5 600K White Balance, Black Balance Adjustment

Minimize the carrier wave using the red & blue gain controls

Waveform for white balance set chart

■RESET TO 3 200K OR 5 600K WHITE BALANCE

When the white balance setting is set to either “P SET 3 200K” or “P SET 5 600K” the white balance will be automatically set to the color temperature 3 200K or 5 600K, respectively.

■ BLACK BALANCE ADJUSTMENT

• Close the lens.

If the motor drive lens is controlled from the cam-

era, the lens is automatically closed when the black

balance is adjusted.

• When the camera is used without a RCU or RCB,

R/B pedestal adjustment of painting setting will be

In user mode, black balance fine adjustment can be performed with the red pedestal/blue pedestal setting after setting the black balance.

[ADJUSTMENT with the RCU (RCB, Hybrid control panel)]

Set the AUTO set switch to ABC and the black balance will be automatically set. While the system is being set, the auto warning indicator (LED) blinks and it goes out when the black balance setting is completed. If the lamp remains lit, ABC should be tried again.

	OPTION CARD	VIDEO OUT
	MENU	I/F REMOTE
	ITEM/AWC	G/L IN
YES/ABC Switch	YES/ABC
	NO/BAR	IRIS
		DC12V IN

AUTO LED

PAINTING

AUTO/ATW R GAIN B

ATW

A

TOTAL

B

PED

automatically reset to ±0 after setting the black bal-

ance. (painting setting in only USER MODE.)

[ADJUSTMENT by CAMERA]

Press the YES/ABC Switch for over 2 seconds and the black balance will be set automatically in 10 seconds.

AUTO R PED B

AWC

AUTOHOLD

ABC

set switch

ABC

-23-