Panasonic AW-E800 manual Connection of a Remote Control BOX RCB

■CONNECTION OF A REMOTE CONTROL BOX (RCB)

The RCB (WV-CB700A) and the camera must be con- nected with the optional RCB cable AW-CA50T10.

1.Turn RCB power off before connecting cables.

2.Connect the 50-pin connector of the RCB cable to I/F REMOTE connector of the camera. The 10-pin connector must be connected to the RCB.

3.Turn RCB power on and the camera can be con- trolled remotely by the RCB.

OPTION CARD	VIDEO OUT
MENU	I/F REMOTE

Notes:

•The monitor output signals of the RCB attenuate and deteriorate with cable length. It is recommend- ed that the signals from the monitor output be used for monitoring purposes only.

•No gen-lock signal is available from the RCB.

•If a longer distance (more than 3 m) is desired

between the camera and the RCB, use the following optional cable.

AW-CA50B10 and WV-CA10B2 (2 m) WV-CA10B25 (25 m) WV-CA10B50 (50 m)

ITEM/AWC G/L IN

YES/ABC

IRIS

NO/BAR

DC12V IN

DC Power Cable AW-CA4T1

RCB Cable AW-CA50T10 (3 m)

Video signal IN

RCB

MONITOR OUT

OFF O I

POWER

	FUSE(POWER)
	POWER
ON	FUSE
	FUSE

AC Adaptor AW-PS505

AC Adaptor

AW-PS505

USER SET

ALL 1 2

RCB WV-CB700A

-16-