![](/images/new-backgrounds/1218427/21842783x1.webp)
#2Electronic Shutter Mode Setting [Shutter Mode:
Step/ELC/S/Scan]
Step: Electronic shutter operates at the speed selected by the Electronic Shutter Step Setting #3.
ELC: Electronic shutter is controlled to automatical- ly adjust the luminance.
S/Scan (Synchro Scan): Electronic shutter oper- ates at the speed selected in Electronic Shutter
Note
If Frame 1 is selected in CCD Read Out Mode Setting #5, Electronic Shutter Mode Setting cannot be added.
#3Electronic Shutter Step Setting
[Step: OFF/1/100 - 1/10 000]
This setting is possible only when Step is selected in Electronic Shutter Mode Setting #2.
OFF: Electronic shutter is turned off.
1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000,
1/10 000: Electronic shutter operates at one of these speeds as selected.
Notes
•In case of using the RCU (RCB), none of the shut- ter
•In case of using the hybrid control panel, only OFF, 1/100, or ELC can be selected.
•If the lens iris switch is at M (Manual) when oper- ating the camera alone or when the iris switch on the RCU (RCB) is at AUTO, ELC may not function. Set the lens iris switch to A (Auto).
•Flickering may increase at ELC under fluorescent lights.
#4Electronic Shutter Synchro Scan Setting [Synchro Scan: 60.58Hz - 15.75kHz]
This setting is possible only when Electronic Shutter Mode Setting #2is at S/Scan.
Bar noise can be reduced by
*For luminance setting at each shutter speed and
next page.