Panasonic AW-E800 manual Connection of Devices with Camera PAN/TILT Control System, Lens

■CONNECTION OF DEVICES WITH CAMERA PAN/TILT CONTROL SYSTEM

•To connect the pan/tilt unit to the camera, use the pan/tilt unit cable AW-CA50T15.

•Power is supplied from the pan/tilt unit.

LENS IRIS Cable

OPTION CARD	VIDEO OUT
MENU	I/F REMOTE
ITEM/AWC	G/L IN
YES/ABC
	IRIS
NO/BAR

1.Before connecting them, press the power switch on the pan/tilt unit AC adaptor and the ON/OFF switch on the hybrid control panel in the OFF position, respectively.

2.Fix the camera securely to the pan/tilt unit using the mounting adaptor.

3.Connect the 50-pin end of the pan/tilt unit cable to the I/F Remote connector on the camera. Connect the 15-pin end of the cable to the pan/tilt unit.

4.Connect the pan/tilt unit to the hybrid control panel with the 10BASE-T cable and coaxial cable. For details, refer to the manual for the hybrid control panel.

5.First switch on the pan/tilt unit AC adaptor, then press the ON/OFF switch on the hybrid control panel in the ON position. The camera and pan/ tilt unit can now be controlled from the hybrid control panel.

LENS	DC12V IN
ZOOM/FOCUS Cable

Camera Mounting

Adaptor (Supplied)

Pan/tilt unit Cable

Pan/tilt unitAW-CA50T15

AW-PH300

	FUSE(POWER)	FUSE(LAMP)
	POWER
OFF	O I ON
	POWER	AC Adaptor
		AW-PS300

Pan/tilt unit AC				Video
Adaptor AW-PS300				Monitor
	Composite Video			S VIDEO
	Hybrid control
10BASE-T panel		G / L I N BREVIEW MONITOR OUT	S-VIDEO OUT	D C 1 2 V I N
Cable	AW-RP501	T D M U L T I P O R T H U B	A U X C O N T R O L

					T A L L Y
P A N / T I L T	C A M E R A
CONTROL OUT CONTROL OUT		6/1	OUT	PREVIEW	IN

	PAN/TILT CONTROL	Control Panel
Coaxial		AC Adaptor
Cable	CAMERA CONTROL	AW-PS301
Coaxial
Cable	VIDEO

-17-