@0Flesh Noise Suppress Level Setting [Flesh Noise
Suppress: OFF/LOW/HIGH]
Flesh noise is suppressed in two steps when the DTL Level is at HIGH or LOW.
@1Electronic Shutter Setting [Shutter Speed:
OFF/1/100 to 1/10 000/S/Scan/Auto ND] OFF: Electronic shutter is turned off.
1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, 1/10 000:
Electronic shutter operates at one of these speeds as selected.
S/Scan (Synchro Scan): Electronic shutter oper- ates at the speed set with the electronic shutter
Auto ND: Electronic shutter is controlled to auto- matically adjust the luminance. (ELC)
Note
•In case of using the RCU (RCB), none of the shutter speeds− 1/250, 1/2 000, 1/4 000, and
1/10 000 can be selected.
•In case of using the hybrid control panel, only OFF, 1/100, or Auto ND (ELC) can be selected.
•If the lens iris switch is at M (Manual) when oper- ating the camera alone or when the iris switch on the RCU (RCB) is at AUTO, Auto ND may not function. Set the lens iris switch to A (Auto).
•Flickering may increase at Auto ND under fluo- rescent lights.
•Auto ND is automatically selected if Auto ND (ELC) setting r is set to ON.
@2Electronic Shutter Synchro Scan Setting [Synchro Scan: 60.58Hz - 15.75kHz]
This setting is possible only when Electronic Shutter setting @1is at S/Scan.
Horizontal bar noise can be reduced by synchro- scan adjustment in shooting workstation scenes, for example.
