Panasonic AW-E800 manual Automatic White Balance Control AWC, Camera

■AUTOMATIC WHITE BALANCE CONTROL (AWC)

There are two white balance memories, “AWC A” or “AWC B” for two different light sources color tempera- tures, with the automatic white balance setting. Then, when the two different light sources are encountered, you may operate the camera properly by simply change the white balance mode to either AWC A or AWC B. There is no need to readjust the camera to the ambient conditions.

*The preset conditions will be renewed whenever you input new conditions.

1.Turn the white balance selection switch to either “AWC A” or “AWC B” of RCU or select the white balance mode either AWC A or AWC B by menu.

2.Aim the camera at a white object (a white wall or a white handkerchief) and zoom in to enlarge the image as much as possible.

[ADJUSTMENT by CAMERA]

3.In normal shooting mode:

Press the ITEM/AWC switch for over 2 second.

	OPTION CARD	VIDEO OUT
ITEM/AWC	MENU	I/F REMOTE
Switch	ITEM/AWC	G/L IN

YES/ABC

IRIS

NO/BAR

DC12V IN

CAMERA

[ADJUSTMENT with the RCU (RCB, Hybrid control panel)]

4.When the AUTO set switch is turned to AWC, the white balance will be automatically set. While the system is being set, auto warning indicator (LED) blinks and it goes out when the white balance set- ting is completed. If the lamp remains lit, the set- ting must be tried again.

RCU (RCB)

PAINTING

AUTO/ATW R GAIN B

ATW

TOTAL

A

B

PED

AUTO LED	AUTO
		R PED B

AWC

HOLD

ABC

AUTO set switch

-21-