uBlack Level Setting [Pedestal: –30 - +30]

The black level (pedestal) of the luminance (Y) sig- nal can be set. Used in adjusting the black levels of two or more cameras.

iContrast Adjustment [Contrast (Gamma): LOW/MID/HIGH]

Contrast can be adjusted to any of three levels.

oChroma Level Adjustment [Chroma Level: –3 - +3]

Chroma Level can be decreased or increased to any of three levels each.

!0Skin Color Adjustment [Flesh Tone: –3 - +3]

Skin color can be decreased or increased to any of three levels each.

!1White Balance Setting [White Bal: ATW/AWC A/

AWC B/P SET 3 200K/P SET 5 600K]

ATW: The white balance is automatically adjusted to be always right.

AWC A, AWC B: Once the white balance is adjust- ed with the ITEM/AWC switch on the back of the camera, it is no longer necessary to set the white balance again if you simply select AWC A or AWC B, provided that the camera is used under the same conditions.

Fine color adjustment can be made after setting AWC by red/blue gain adjustment in user mode or from the RCU (RCB).

P SET 3 200K: The white balance is adjusted to 3 200K illumination.

P SET 5 600K: The white balance is adjusted to 5 600K illumination.

Note

Neither P SET 3 200K nor P SET 5 600K can be set from the RCU (RCB) or the hybrid control panel.

!2Highlight Chroma Setting [Highlight Chroma:

OFF/LOW/HIGH]

At LOW or HIGH, the color dynamic range widens to prevent highlighted white portions from suppres- sion.

!3Horizontal Phase Adjustment

[H Phase: –206 - +49]

Horizontal phase can be adjusted when a genlock signal is supplied.

-34-

Page 36
Image 36
Panasonic AW-E800 manual Black Level Setting Pedestal -30 +30, Contrast Adjustment Contrast Gamma LOW/MID/HIGH