Configuration
5.8. Network Configuration
The Network Parameters Menus are used to select parameters and options for the Network Port and also allow you to implement IP Security features, which can restrict access based on the user’s IP Address.
Although the Web Browser Interface and Text Interface allow definition of essentially the same parameters, parameters are arranged differently in the two interfaces. In the Text Interface, most network parameters are defined via one menu. But in the Web Browser Interface, network parameters are divided between eight separate submenus as described in this section.
NETWORK PARAMETERS: |
|
|
|
| |
COMMUNICATION SETTING | 192.168.168.168 | SERVERS AND CLIENTS | On | ||
1. | IP Address: | 21. | Telnet Access: | ||
2. | Subnet Mask: | 255.255.255.0 | 22. | SSH Access: | On |
3. | Gateway Addr: | (undefined) | 23. | Web Access: | On |
4. | DHCP: | Off | 24. | SYSLOG Addr: | (undefined) |
5. | IP Security: | Off | 25. | SNMP Access: | Off |
6. | Static Route: | Off | 26. | SNMP Trap: | Off |
7. | DNS Servers: | (undefined) | 27. | LDAP: | Off |
GENERAL PARAMETERS |
| 28. | TACACS: | Off | |
Permit | 29. | RADIUS: | Off | ||
11. | Supervisor Mode: | 30. | PING Access: | On | |
12. | Logoff Char: | ^X | 31. | Raw Socket Access: Off | |
13. | Sequence Disc: | One Char |
|
|
|
14. | Inact Timeout: | 5 Min |
|
|
|
15. | Command Echo: | On |
|
|
|
16. | Accept Break: | On |
|
|
|
Enter: #<CR> to change,
<ESC> exit ...
