Configuration

On - Callback ONLY (Without Password Prompt): Callbacks will be performed for user accounts that include a Callback Number, and the username/password prompt will not be displayed when the user’s modem answers. Accounts that do not include a Callback Number will not be able to access command mode via an RSM modem port.

On - Callback ONLY (With Password Prompt): Callbacks will be performed for user accounts that include a Callback Number, and the username/password prompt will be displayed when the user’s modem answers (users will be required to re-enter their username/password when their modem answers.) Accounts that do not include a Callback Number will not be able to access command mode via an RSM modem port.

Callback Attempts: The number of times that the RSM will attempt to call the Callback number. (Default = 3 attempts.)

Callback Delay: The amount of time that the RSM will wait between Callback attempts. (Default = 30 seconds.)

Notes:

After configuring and enabling Callback Security, you must then define a callback phone number for each desired user account (as described in Section 5.6) in order for this feature to function properly.

When using the "On - Callback (With Password Prompt)" option, it is important to always define a callback number for each user account. Otherwise accounts that do not include a callback number will be allowed to immediately access command mode, and the callback function will not be performed.

5-11

Page 30
Image 30
Western Telematic RSM-32DC, RSM-8, RSM-16DC manual Configuration