Command Reference Guide

/W Display Port Parameters (Who)

Displays configuration information for an individual port, but does not allow the user to change parameters. Accounts that do not permit Supervisor commands can only display parameters for their resident port. For more information, please refer to Section 6.4.

Availability: Supervisor / Non-Supervisor

Format: /W [x] [Enter]

Where x is the port number or name. To display parameters for the Network Port, enter an "N". If the "x" argument is omitted, parameters for your resident port will be displayed.

Response: Displays port parameters.

Example: To display parameters for a port named "SERVER", access the Command

Mode from a port and account that permits Supervisor commands, and type /W SERVER [Enter].

/X Exit Command Mode

Exits command mode. When issued at the Net Port, also ends the Telnet session. Note that exiting from command mode will not terminate port connections.

Any-to-Any Mode: Exits command mode.

Modem Mode: Disconnects and resets modem, hang-up message is sent, hardware line to modem drops for 500 ms, and reset message is sent.

Availability: Supervisor / Non-Supervisor

Format: /X [Enter]

Response: Disconnected.

13-10

Page 112
Image 112
Western Telematic RSM-16, RSM-32DC manual Display Port Parameters Who, Format /W x Enter, Exit Command Mode, Format /X Enter