5-35
Configuration
5.8.5. Domain Name Server
The Domain Name Server menu is used to select IP addresses for the Domain Name
Servers. When web and network addresses are entered, the Domain Name Server
interprets the domain name (e.g., www.wti.com), and translates it into an IP address.
Note that if you don't define at least one DNS server, then IP addresses must be used,
rather than domain names.
To access the Domain Name Server Menu, proceed as follows:
• Text Interface: Type /N and press [Enter] to display the Network Parameters
Menu (Figure 5.9.) At the Network Parameters Menu, type 7 and press [Enter].
The Static Route Menu should appear as shown in Figure 5.17.
• Web Browser Interface: Click on the "Network Configuration" link on the left
hand side of the RSM Home screen to display the Network Configuration menu
(Figure 5.10). From the Network Configuration Menu, Click the Domain Name
Server link to display the menu shown in Figure 5.18.
Figure 5.18: Domain Name Server Menu (Web Browser Interface)
DNS SERVER IP ADDRESSES:
1.
2.
3.
4.
Enter: #<CR> to select menu,
<ESC> for previous menu ...
Figure 5.17: Nomain Name Server Menu (Text Interface)