Western Telematic RSM-16, RSM-16DC, RSM-32, RSM-32DC, RSM-8

5-37

Configuration

In the Text Interface SNMP parameters are defined via two separate menus, The SNMP

Access Menu and the SNMP Trap Menu. In the Web Browser Interface, all SNMP

parameters are defined via a single menu. Both the Text Interface and Web Browser

Interface allow the following parameters to be defined:

• Enable: Enables/disables SNMP Polling. (Default = Off.)

Note: This item only applies to external SNMP polling of the RSM; it does not

effect the ability of the RSM to send SNMP traps.

• SNMP Contact: (Default = undefined.)

• SNMP Location: (Default = undefined.)

• SNMP Community: (Default = Public.)

• SNMP Manager 1: The IP Address for the first SNMP Manager. For more

information, please refer to Section 10. (Default = Undefined.)

Note: In order to enable the SNMP Trap feature, you must define at least one

SNMP Manager.

• SNMP Manager 2: (Default = Undefined.)

• Trap Community: (Default = Public.)

Contents

Main RSM Series Warnings and Cautions: Installation Instructions Secure Racking Input Supply Grounding No Serviceable Parts Inside; Authorized Service Personnel Only Page Agency Approvals FCC Part 15 Regulation EMC, Safety, and R&TTE Directive Compliance Industry Canada iv Table of Contents v Page vii List of Figures 1. Introduction Configuration Backup RSM-8, RSM-16, RSM-16DC, RSM-32 and RSM-32DC Units Typographic Conventions 2. Unit Description 2.1. Front Panel Page 3. Getting Started 3.1. Quick Hardware Installation 3.2. Communicating with the RSM Page Page -48V 0.1A 4. Hardware Installation 4.1. Connecting Power to the RSM Unit 4.2. Connecting the Network Cable 4.3. Connecting Devices to the RSM 5. Configuration 5.1. Communicating with the RSM Unit Page Page 5.2. System SetUp Ports 5.3. Configuration Menus 5.4. Defining System Parameters Page Page Page Page Page Page 5.5. User Accounts 5.6. Managing User Accounts Page Page Page 5.7. RS232 Port Configuration 5-18 Configuration Figure 5.8: Port Configuration Menu (Web Browser Interface) Figure 5.7: Port Configuration Menu (Text Interface) Page Page Page Page Page 5.8. Network Configuration Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page 5.9. Copying Parameters to Several RS-232 Ports (Text Interface Only) 5.10. Save User Selected Parameters Page 6.1. The Port Status Screen (/S) 6.2. The Port Diagnostics Screen (/SD) 6.3. The Network Status Screen (/SN) 6.4. The Port Parameters Screens (/W) Page 7. Operation 7.1. Any-to-Any Mode Page Page Page Page 7.2. Passive Mode 7.3. Buffer Mode Page 7.4. Modem Mode 8. Telnet & SSH Functions 8.1. Network Port Numbers 8.2. SSH Encryption 8.3. The Direct Connect Feature Page Page Page Page 9. The Syslog Feature 9.1. Configuration 9.2. Criteria for Generating a Syslog Message 9.3. Testing Syslog Configuration 10. SNMP Traps 10.1. Configuration: 10.2. SNMP Trap Message 10.3. How and When SNMP Traps are Sent 10.4. Testing the SNMP Trap Function 11. Saving and Restoring Configuration Parameters 11.1. Sending Parameters to a File 11.2. Restoring Saved Parameters 12. Upgrading RSM Firmware Page 13. Command Reference Guide 13.1. Command Conventions 13-2 13.2. Command Summary 13.3. Command Set Page Page Page Page Page Page Page Appendix A. RS232 Port Interface Appendix B. Specifications Appendix C. Customer Service Page Index-1 Index Index-2 Index-3 Index-4

Western Telematic - page 56

Models: RSM-16 RSM-16DC RSM-32 RSM-32DC RSM-8