5-31
Configuration
1. Access the IP Security Configuration Menu.
a) Text Interface: Type /N [Enter] to display the Network Configuration Menu.
From the Network Configuration Menu, type 5 [Enter] to display the screen
shown in Figure 5.13.
b) Web Browser Interface: Click on "Network Configuration" on the left hand
side of the screen. When the Network Configuration menu appears, click on
"IP Security" to display the screen shown in Figure 5.14.
2. Allow List: Enter the IP Address(es) for the clients that you wish to allow. Note that
if an IP Address is found in the Allow list, the client will be allowed to connect, and
the RSM will not check the Deny list.
a) Text Interface: Note the number for the first empty field in the Allow list, then
type that number at the command prompt, press [Enter], and then follow the
instructions in the resulting submenu.
b) Web Browser Interface: Place the cursor in the first empty field in the
parameters menu, then key in the desired IP Address, operators, wild cards,
and/or net/mask pairs.
3. Deny List: Enter the IP Address(es) for the clients that you wish to deny. Note that
if the client’s IP Address is not found in the Deny List, that client will be allowed to
connect. Use the same procedure for entering IP Addresses described in Step 2
above.