Appendix B. Specifications | Western Telematic RSM-16DC, RSM-32DC

Appendix B. Specifications

Network Interface: 10/100Base-T Ethernet, RJ45, multi-session Telnet.

RS232 Port Interface:

Connectors:

•Model RSM-8:Eight (8) DB9 connectors (DTE pinout.)

•Models RSM-16 & RSM-16DC:Sixteen (16) DB9 connectors (DTE pinout.)

•Models RSM-32 & RSM-32DC:Thirty Two (32) DB9 connectors (DTE pinout.) Coding: 7/8 bits, Even, Odd, No Parity, 1, 2 Stop Bits.

Flow Control: XON/XOFF, RTS/CTS, Both, or None.

Data Rate: 300 to 115.2K bps (all standard rates).

Inactivity Timeout: No activity timeout disconnects port/modem sessions. Off, 5, 15, 30, 90 minutes.

Memory: Stores Parameters and captured data. 256K per port.

Break: Send Break or Inhibit Break

Site ID: 32 Characters.

Port Name: 16 Characters per port.

Usernames & Passwords: 16 characters each (case sensitive.) Up to 128 pairs, definable port and system access.

LEDs: Power On, Ready, Data Activity for each RS232 Serial Port.

Physical / Environmental:

Power:

•AC Version: IEC-320 Inlet, 100 to 240 VAC, 50/60 Hz, 5 Watts

•DC Version: Terminal Strip (#6-32), -48 VDC, 0.2 Amp Max.

Size:

•Models RSM-8, RSM-16 & RSM-16DC: Height: 1.75" (4.4 cm), 1 Rack Unit. Width: 19.00" (48.3 cm)

Depth: 6.50" (16.5 cm) Rack Mounts Included.

•Models RSM-32 and RSM-32DC:

Height: 3.5" (8.8 cm), 2 Rack Units.

Width: 19.00" (48.3 cm)

Depth: 8.75" (22.2 cm) Rack Mounts Included.

Shipping Weight:

•Models RSM-8, RSM-16 & RSM-16DC: 6 lbs. (2.7 Kg.)

•Models RSM-32 & RSM-32DC: 12 Lbs. (5.5 Kg.)

Operating Temperature: 32°F to 122°F (0°C to 50°C)

Storage Temperature: -4°F to 128°F (-20°C to 70°C)

Humidity: 10 to 90% RH, Non-Condensing

Venting: Side vents are used to dissipate heat generated within the unit. When mounting the unit in an equipment rack, make certain to allow adequate clearance for venting.

Apx-2

Image 114

Western Telematic RSM-16DC Appendix B. Specifications, RS232 Port Interface Connectors, Physical / Environmental Power

Contents

RSM Series Shock Hazard Do Not Enter Lithium Battery Secure Racking Disconnect Power Agency Approvals Table of Contents Configuration Table of Contents List of Figures Intelligent Port Selection Security and Collocation FeaturesIntroduction Capture Buffer Typographic Conventions Configuration BackupRSM-8, RSM-16, RSM-16DC, RSM-32 and RSM-32DC Units Bold Font Unit Description Front Panel Back Panel Instrument Back Panel Model RSM-8  Power On/Off Switch Getting Started Quick Hardware InstallationApply Power to the RSM Connect your Control Device to the RSM Communicating with the RSM Port Status Screen Text Interface RSM-8 Shown Getting Started Hardware Installation Connecting Power to the RSM UnitDC Powered Units Connecting the Network Cable Connecting Devices to the RSM Configuration Communicating with the RSM UnitText Interface Configuration Web Browser Interface Home Screen Web Browser Interface System SetUp Ports Configuration Menus Defining System Parameters System Parameters Configuration Real Time Clock and Calendar Invalid Access Lockout Feature Audit Log Callback Security Configuration Supervisor Access Port AccessUser Accounts Managing User Accounts Viewing User Accounts Adding User Accounts Add User Menu Text Interface RSM-8 Shown Configuration Modifying User Accounts Deleting User Accounts RS232 Port Configuration 1. RS232 Port Modes Port Configuration Menu Text Interface 2. RS232 Port Configuration Menus Communication Settings General Parameters Port Mode Parameters AT&C1&D2S0=1&B1&H1&R2 Network Services Configuring the Internal Modem Network Configuration Servers and Clients Configuration Network Parameters 11 Network Parameters Menu Web Browser Interface Network Port Parameters 12 Network Port Parameters Menu Web Browser Interface Configuration IP Security IP Security Configuration Configuration Except Net/Mask Pairs Configuration Static Route 15 Static Route Menu Text Interface Domain Name Server 17 Nomain Name Server Menu Text Interface 19 Snmp Access Menu Text Interface Snmp Parameters Configuration Ldap Parameters Ldap Configuration Group Membership Value Type Default = DN Ldap Group 25 Add Ldap Group Menu Text Interface RSM-8 Shown 27 View Ldap Group Menu Text Interface RSM-8 Shown 29 Modify Ldap Group Menu Text Interface RSM-8 Shown 31 Delete Ldap Group Menu Web Browser Interface 32 Ldap Kerberos Set Up Menu Text Interface Configuration Tacacs Parameters 34 The Tacacs Parameters Menu Text Interface Configuration Radius Parameters 36 The Radius Parameters Menu Text Interface Configuration 38 The Copy Port Parameters Menu Save User Selected Parameters CP 3,5,7-9 Enter Status Screens Port Status Screen /S Status Screens Port Diagnostics Screen /SD Port Diagnostics Screen RSM-8 Shown Network Status Screen /SN Porttcp Portstatus Username Port Parameters Screens /W Port Parameters Screen RS232 Port Shown Xx Enter Any-to-Any Mode OperationPort Connection and Disconnection Operation Operation 4 Enter Enter Defining Hunt Groups Hunt Group Example Passive Mode Buffer Mode Reading Data from Buffer Mode Ports Port Buffers Modem Mode Telnet & SSH Functions Network Port NumbersSSH Encryption Direct Connect Feature ConfigurationStandard Telnet Protocol, SSH and Raw Socket Telnet & SSH Functions RSM-16 & RSM-16DC Standard Telnet Direct Connection without Password RSM-8SSH Direct Connection with Password RSM-8 RSM-32 & RSM-32DC Raw Socket Direct Connection with Password RSM-8 Raw Socket Direct Connection without Password RSM-8Connection Example Terminating a Direct Connect Session Syslog Feature Configuration Criteria for Generating a Syslog Message Testing Syslog Configuration Test Menu Text Interface, Supervisor Mode Only Snmp Traps 10-1 How and When Snmp Traps are Sent Snmp Trap MessageSnmp Contact Optional Snmp Location Optional Testing the Snmp Trap Function Saving and Restoring Configuration Parameters Sending Parameters to a File Restoring Saved Parameters Upgrading RSM Firmware 12-1 12-2 Command Reference Guide Command Conventions Command Summary Command Set Resident Disconnect SequenceAudit Log CP Copy RS232 Port Parameters ConnectFormat /C x x Enter Format /CP Enter 2 Enter or /D/Y 3 Enter Third Party DisconnectFormat /D/Y x x Enter Erase Buffer Help Reboot System DefaultSet System Parameters Display Site ID Send SSH Key Set Network Port ParametersSet RS232 Port Parameters Read Buffer PW Change PasswordSD Display Port Diagnostics Display Port Status Test Test Network Parameters UF Upgrade FirmwareUL Unlock Port Invalid Access Lockout Save Parameters Format /W x Enter Exit Command ModeDisplay Port Parameters Who Format /X Enter When connected When not connectedAppendix A. RS232 Port Interface Physical / Environmental Power Appendix B. SpecificationsRS232 Port Interface Connectors Models RSM-32 and RSM-32DC Appendix C. Customer Service Trademark and Copyright Information Trademarks Used in this Manual Index Tacacs Dhcp Index-2 Index-3 Index-4