Dell Command Line Interface manual Omconfig system webserver

Severity

In the context of configuring events, severity determines how severe an event must be before Server Administrator notifies you of the event for a component type. When there are multiple components of the same type in the same system chassis, you can also specify whether you want to be notified for event severity according to the number of the component by using the index=<n> parameter. Table 4-26 shows the valid severity parameters.

Table 4-26. System Event Severity Parameters

Command	Result	Description
omconfig system events type=<component name>	Enables notification for	Least restrictive form of event
severity=info	informational, warning,	notification.
	and critical events.
omconfig system events type=<component name>	Enables notification for	Omits informational event
severity=warning	warning and critical	notification, for example, when a
	events.	component returns to normal status.
omconfig system events type=<component name>	Enables notification for	Restrictive form of event
severity=critical	critical events only.	notification.
omconfig system events type=<component name>	Disables event	No event notification.
severity=none	notification.

Index

Index refers to the number of an event for a particular component. Index is an optional parameter. When you omit the index parameter, events are configured for all components of the specified type, such as all fans. When a system contains more than one fan, for example, you can enable or disable event notification for a particular fan. An example command is as follows:

omconfig system events type=fan index=0 severity=critical

As a result of the example command, Server Administrator will send an SNMP trap only when the first fan in the system chassis (index 0) has reached critical fan RPMs.

omconfig system webserver

Use the omconfig system webserver command to start or stop the Web server. Table 4-27 shows the valid parameters for the command.

Table 4-27. Web Server Configuration Parameters

name=value pair	Description
action=start	Starts the Web server.
action=stop	Stops the Web server.
action=restart	Restarts the Web server.

96

omconfig: Managing Components Using the Instrumentation Service