Juniper Networks J-Series Table 37 on page 70., OK., Cancel., Configuration on page 75., Configuration on page 75.

3. Enter information into the DHCP Quick Configuration pages, as described in
Table 37 on page 70.
4. Click one of the following buttons on the DHCP Quick Configuration page:
■To apply the configuration and return to the Quick Configuration page, click
OK.
■To cancel your entries and return to the Quick Configuration page, click
Cancel.
5. Go on to one of the following procedures:
■To display the configuration, see Displaying a DHCP Server
Configuration on page 75.
■To verify DHCP operation, see “Verifying a DHCP Server
Configuration” on page 75.
Table 37: DHCP Server Quick Configuration Pages Summary
Your ActionFunctionField
DHCP Pool Information
Type an IP address prefix.Specifies the subnet on which DHCP is
configured.
DHCP Subnet (required)
Type an IP address that is part of the subnet
specified in DHCP Subnet.
Specifies the lowest address in the IP address
pool range.
Address Range (Low)
(required)
Type an IP address that is part of the subnet
specified in DHCP Subnet. This address must
be greater than the address specified in Address
Range (Low).
Specifies the highest address in the IP address
pool range.
Address Range (High)
(required)
Do either of the following:
■To add an excluded address, type the
address next to the Add button, and click
Add.
■To delete an excluded address, select the
address in the Exclude Addresses box, and
click Delete.
Specifies addresses to exclude from the IP
address pool.
Exclude Addresses
Lease Time
Type a number between 60 and 4,294,967,295
(seconds). You can also type infinite to specify
a least that never expires.
Specifies the maximum length of time a client
can hold a lease. (Dynamic BOOTP lease
lengths can exceed this maximum time.)
Maximum Lease Time
(Seconds)
Type a number between 60 and 2,147,483,647
(seconds). You can also type infinite to specify
a least that never expires.
Specifies the length of time a client can hold a
lease, for clients that do not request a specific
lease length.
Default Lease Time
(Seconds)
Server Information
70 ■Configuring the DHCP Server with Quick Configuration
J-series™ Services Router Administration Guide