Juniper Networks J-Series manual Dhcp Conflicts, Dhcp Statistics

J-series™ Services Router Administration Guide

Table 76: Summary of DHCP Output Fields (continued)

Field	Values	Additional Information
Binding	Type of binding assigned to the client: dynamic or	DHCP servers can assign a dynamic binding from a pool
Type	static.	of IP addresses or a static binding to one or more
		specific IP addresses.
Lease	Date and time the lease expires, or never for leases
Expires	that do not expire.

DHCP Conflicts

Detection	Date and time the client detected the conflict.
Time
Detection	How the conflict was detected.
Method
Address	IP address where the conflict occurs.
DHCP Pools
Pool Name	Subnet on which the IP address pool is defined.
Low	Lowest address in the IP address pool.
Address
High	Highest address in the IP address pool.
Address
Excluded	Addresses excluded from the address pool.
Addresses
DHCP Statistics
Default	Lease time assigned to clients that do not request a
lease time	specific lease time.
Minimum	Minimum time a client can retain an IP address lease
lease time	on the server.
Maximum	Maximum time a client can retain an IP address lease
lease time	on the server.
Packets	Total number of packets dropped and the number of
dropped	packets dropped due to a particular condition.
Messages	Number of BOOTREQUEST, DHCPDECLINE,
received	DHCPDISCOVER, DHCPINFORM, DHCPRELEASE,
	and DHCPREQUEST messages sent from DHCP clients
	and received by the DHCP server.
Messages	Number of BOOTREPLY, DHCPACK, DHCPOFFER,
sent	and DHCPNAK messages sent from the DHCP server
	to DHCP clients.

Only client-detected conflicts are displayed.

The addresses in the conflicts list remain excluded until you use the clear system services dhcp conflict command to manually clear the list.

144■ Using the Monitoring Tools