Juniper Networks J-Series manual Health Monitoring

J-series™ Services Router Administration Guide

Table 30: SNMP Quick Configuration Summary (continued)

Field	Function
Categories	Specifies which trap categories are
	added to the trap group being
	configured.

Targets	One or more hostnames or IP addresses
	that specify the systems to receive SNMP
	traps generated by the trap group being
	configured.
Health Monitoring

Your Action

■To generate traps for authentication failures, select Authentication.

■To generate traps for chassis and environment notifications, select Chassis.

■To generate traps for configuration changes, select Configuration.

■To generate traps for link-related notifications (up-down transitions), select Link.

■To generate traps for remote operation notifications, select Remote operations.

■To generate traps for remote network monitoring (RMON), select RMON alarm.

■To generate traps for routing protocol notifications, select Routing.

■To generate traps on system warm and cold starts, select Startup.

■To generate traps on Virtual Router Redundancy Protocol (VRRP) events (such as new-master or authentication failures), select VRRP events.

1.Enter the hostname or IP address, in dotted decimal notation, of the target system to receive the SNMP traps.

2.Click Add.

52■ Configuring SNMP with Quick Configuration