Juniper Networks J-Series manual Monitoring RPM Probes, Show services rpm probe-results

Chapter 7: Monitoring the Router and Routing Operations

Monitoring RPM Probes

The RPM information includes the round-trip time, jitter, and standard deviation values for each configured RPM test on the Services Router. To view these RPM properties, select Monitor>RPM in the J-Web interface, or enter the following CLI show command:

show services rpm probe-results

In addition to the RPM statistics for each RPM test, the J-Web interface displays the round-trip times and cumulative jitter graphically. Figure 11 on page 145 shows sample graphs for an RPM test.

Figure 11: Sample RPM Graphs

ERROR: Unresolved graphic fileref="s020039.gif" not found in

"\\teamsite1\default\main\TechPubsWorkInProgress\STAGING\images\".

In Figure 11 on page 145, the round-trip time and jitter values are plotted as a function of the system time. Large spikes in round-trip time or jitter indicate a slower outbound (egress) or inbound (ingress) time for the probe sent at that particular time.

Table 77 on page 145 summarizes key output fields in RPM displays.

Table 77: Summary of Key RPM Output Fields

Field	Values		Additional Information
Currently Running Tests
Graph			Click the Graph link to display the graph (if it is not
			already displayed) or to update the graph for a particular
			test.
Owner	Configured owner name of the RPM test.
Test Name	Configured name of the RPM test.
Probe Type	Type of RPM probe configured for the specified test.
	Following are valid probe types:
	■	http-get
	■	http-get-metadata
	■	icmp-ping
	■	icmp-ping-timestamp
	■	tcp-ping
	■	udp-ping
Target	IP address or URL of the remote server that is being
Address	probed by the RPM test.
Source	Explicitly configured source address that is included		If no source address is configured, the RPM probe
Address	in the probe packet headers.		packets use the outgoing interface as the source address,
			and the Source Address field is empty.

Using the Monitoring Tools ■ 145