Juniper Networks J-Series Setting Up Template Accounts, Creating User Accounts, ConfigurationView

J-series™ Services Router Administration Guide

To create user accounts:

1.Navigate to the top of the configuration hierarchy in either the J-Web or CLI configuration editor.

2.Perform the configuration tasks described in Table 15 on page 18.

3.If you are finished configuring the network, commit the configuration.

Table 15: Creating User Accounts

Task	J-Web Configuration Editor
Navigate to the System Login level in	1.	In the J-Web interface, select
the configuration hierarchy.		Configuration>View and
		Edit>Edit Configuration.
	2.	Next to System, click Configure or
		Edit.
	3.	Next to Login, click Configure or
		Edit.
Create a user named cmartin who	1.	Next to User, click Add new entry.
belongs to the superuser login class.	2.	In the User name box, type cmartin.
	3.	In the Class box, type superuser.
	4.	Click OK.

CLI Configuration Editor

From the [edit] hierarchy level, enter

edit system login

Set the username and the login class for the user:

set user cmartin class superuser

Define the encrypted password for cmartin.

1.Next to Authentication, click Configure.

2.In the Encrypted password box, type

$1$14c5.$sBopasdFFdssdfFFdsdfs0

Set the encrypted password for cmartin.

set user cmartin authentication encrypted-password $1$14c5.$sBopasdFFdssdfFFdsdfs0

3.Click OK.

Setting Up Template Accounts

You can create template accounts that are shared by a set of users when you are using RADIUS or TACACS+ authentication. When a user is authenticated by a template account, the CLI username is the login name, and the privileges, file ownership, and effective user ID are inherited from the template account.

This section contains the following topics:

■Creating a Remote Template Account on page 19

■Creating a Local Template Account on page 20

18■ Managing User Authentication with a Configuration Editor