Juniper Networks J-Series manual Rebooting or Halting a Services Router

Models: J-Series

1 332
Download 332 pages 610 b
Page 216
Image 216

J-series™ Services Router Administration Guide

WARNING: that disk is larger than 800 MB! Make sure you're not accidentally overwriting your primary hard disk! Proceeding on your own risk...

About to overwrite the contents of disk 1 with new data. Proceed? (y/n) y

511451136/511451136 bytes written in total

NOTE: The copy process can take several minutes.

After copying the software package to the compact flash, you can use it as the internal compact flash in any J-series Services Router. For installation instructions, see the Getting Started Guide for your router.

Rebooting or Halting a Services Router

Reboot or halt a Services Router with either the J-Web interface or the CLI. This section contains the following topics:

Rebooting or Halting a Services Router with the J-Web Interface on page 194

Rebooting a Services Router with the CLI on page 195

Halting a Services Router with the CLI on page 196

Rebooting or Halting a Services Router with the J-Web Interface

You can use the J-Web interface to schedule a reboot or halt the Services Router.

Figure 17 on page 194 shows the Reboot page for the router.

Figure 17: Reboot Page

ERROR: Unresolved graphic fileref="s020262.gif" not found in "\\teamsite1\default\main\TechPubsWorkInProgress\STAGING\images\".

To reboot or halt the router with the J-Web interface:

1.In the J-Web interface, select Manage>Reboot.

2.Select one of the following options:

Reboot Immediately—Reboots the router immediately.

Reboot in number of minutes—Reboots the router in the number of minutes from now that you specify.

Reboot when the system time is hour:minute—Reboots the router at the absolute time that you specify, on the current day. You must select a 2-digit hour in 24-hour format, and a 2-digit minute.

Halt Immediately—Stops the router software immediately. After the router software has stopped, you can access the router through the console port only.

194Rebooting or Halting a Services Router

Page 216
Image 216
Juniper Networks J-Series manual Rebooting or Halting a Services Router