Juniper Networks J-Series manual Adding New Users, To configure users with Quick Configuration

Chapter 1: Managing User Authentication and Access

Adding New Users

You can use the Users Quick Configuration page for user information to add new users to a Services Router. For each account, you define a login name and password for the user and specify a login class for access privileges.

Figure 4 on page 11 shows the Quick Configuration page for adding a user.

Figure 4: Add a User Quick Configuration Page

ERROR: Unresolved graphic fileref="s020244.gif" not found in "\\teamsite1\default\main\TechPubsWorkInProgress\STAGING\images\".

To configure users with Quick Configuration:

1.In the J-Web interface, select Configuration>Quick Configuration>Users.

2.Under Users, click Add to add a new user.

3.Enter information into the Add a User Quick Configuration page, as described in Table 10 on page 11.

4.Click one of the following buttons on the Add a User Quick Configuration page:

■To apply the configuration and return to the Users Quick Configuration page, click OK.

■To cancel your entries and return to the Users Quick Configuration page, click Cancel.

Table 10: Add a User Quick Configuration Page Summary

Field	Function	Your Action
User Information
Username (required)	Name that identifies the user.	Type the username. It must be unique within the router. Do not
		include spaces, colons, or commas in the username.
Full Name	The user's full name.	Type the user's full name. If the full name contains spaces, enclose
		it in quotation marks. Do not include colons or commas.
Login Class (required)	Defines the user's access	From the list, select the user's login class:
	privilege.

■ operator

■ read-only

■ super-user/superuser

■ unauthorized

This list also includes any user-defined login classes. For more information, see “Login Classes” on page 5.

Managing User Authentication with Quick Configuration ■ 11