Chapter 2 Avaya C460 CLI Commands

<name>

list name

Example:

C460-1(configure)#ip access-list-name 101 morning

If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.

ip access-list-owner

User level: read-write, admin.

If you are at the “read-write” user level, you can only access this command in Configure mode.

Type configure at the command prompt to enter configure mode.

Use the ip access-list-ownercommand to set the owner for a specific policy list.

The syntax for this command is:

ip access-list-owner<policy-list-number> <owner>

<policy-list-number>

integer (100 to 149)

<owner>

list owner

Example:

 

Router-1>ip access-list-owner 101 admin

Done!

ip address

User level: read-write, admin.

You can only access this command in interface mode.

Type interface [name] at the command prompt to enter interface mode.

Use the ip address command to assign an IP address and mask to an interface.

The syntax for this command is:

ip address <ip-address> <mask> [<admin-state>]

ip address

The IP address assigned to the interface.

Avaya C460 Reference Guide

43

Page 55
Image 55
Avaya C460-1configure#ip access-list-name 101 morning, Ip access-list-owner, Router-1ip access-list-owner 101 admin