Chapter 2
Avaya C460 CLI Commands
This chapter describes all the C460 CLI commands and parameters in alphabetical order.
access list
See “ip
area
User level: read-write, admin.
You can only access this command in
Type router ospf at the command prompt to enter Router
Use the area command to configure the area ID of the router.
Use the no area command to delete the area ID of the router (set it to 0) and remove the stub definition.
The default area is 0.0.0.0.
You cannot define a stub area when OSPF is redistributing other protocols or when the Area ID is 0.0.0.0.
The syntax for this command is:
[no] area <area id> [<stub>]
area id | IP address |
stubStub
Example:
Avaya C460 Reference Guide | 13 |
