Avaya manual Set port dot1x re-authperiod, C460-1super#set port dot1x re-authperiod 1/2

Chapter 2 Avaya C460 CLI Commands

The syntax for this command is:

set port dot1x re-authentication <module/port> <mode>

module/	Module and port number
port	You can also specify a range of ports separated by a dash, for
	example, 4/5-13 for ports 5 to 13 on module 4.
mode	•	enable
	•	disable

Example:

C460-1(super)#set port dot1x re-authentication 1/2 enable port 1/2 re-authenticate was set to enable

set port dot1x re-authperiod

User level: admin.

Use the set port dot1x re-authperiodcommand to set the the idle time between re-authentication attempts before the session is terminated.

The syntax for this command is:

set port dot1x re-authperiod <module/port> <seconds>

module/	Module and port number
port	You can also specify a range of ports separated by a dash, for
	example, 4/5-13 for ports 5 to 13 on module 4.
seconds	Idle time in seconds – 0 to 65535
Example:

C460-1(super)#set port dot1x re-authperiod 1/2 400

set port dot1x server-timeout

User level: admin.

Use the set port dot1x server-timeoutcommand to set the time to wait for a reply from the Authentication Server before the session is terminated.

104 Avaya C460 Reference Guide