Chapter 2 Avaya C460 CLI Commands
show port vlan-binding-mode
User level:
Use the show
The syntax for this command is:
show port vlan-binding-mode [module[/port]]
module | Number of the module |
| the ports on all the modules are shown. |
port | Number of the port on the module. If you do not specify a |
(Optional) | number, all the ports on the module are shown. |
| You can also specify a range of ports separated by a dash, for |
| example, |
Example: |
|
port 2/2 is statically bound port 2/3 is statically bound port 2/4 is statically bound port 2/5 is statically bound port 2/6 is statically bound port 2/7 is statically bound port 2/8 is statically bound port 2/9 is statically bound port 2/10 is statically bound
show powerinline
User level:
Use the show powerinline command display the port powerinline configuration.
The syntax for this command is:
show powerinline <module_number [/port_number]>
module | Number of the module |
(optional) | the ports on all the modules are configured. |
198 | Avaya C460 Reference Guide |