Avaya manual Show timezone, C460-1show timezone, Show trunk, C460-1 show trunk 4/1

Chapter 2 Avaya C460 CLI Commands

show timezone

User level: read-only, read-write, admin.

Use the show timezone command to display the current C460 time zone.

The syntax for this command is:

show timezone

Example:

C460-1>show timezone

Timezone set to 'GMT', offset from UTC is 0 hours

show trunk

User level: read-only, read-write, admin.

Use the show trunk command to display VLAN tagging information for the switch.

The syntax for this command is:

show trunk [<module>[/<port>-<port]]

module		Number of the module. If you do not specify a number, all
(Optional)		modules are shown.
port		Number of the port on the module. If you do not specify a
(Optional)		number, all the ports on the module are shown.
		You can also specify a range of ports separated by a dash, for
		example, 4/5-13 for ports 5 to 13 on module 4
Example:
C460-1>show trunk 4/1
Port	Mode	Binding mode	Native vlan
-----	-----	--------------------	-----------
41/1	off	statically bound	1
41/2	dot1q	statically bound	2
Output Fields:
Field		Description
Port		Switch and port number(s)

Avaya C460 Reference Guide 221