Chapter 2 Avaya C460 CLI Commands

Example:

Router-1>ip ospf router-id 192.168.49.1

ip proxy-arp

User level: read-write, admin.

You can only access this command in interface mode.

Type interface [name] at the command prompt to enter interface mode.

Use the ip proxy-arpcommand to enables proxy ARP on an interface.

Use the no ip proxy-arpcommand to disable proxy ARP on an interface.

The syntax for this command is:

[no] ip proxy-arp

Example:

To disable proxy ARP on interface marketing:

Router-1(config-if:marketing)#no ip proxy arp

ip redirects

User level: read-write, admin.

You can only access this command in interface mode.

Type interface [name] at the command prompt to enter interface mode if necessary.

Use the ip redirects command to enables the sending of redirect messages on the interface.

Use the no ip redirects command to disable the redirect messages. By default, sending of redirect messages on the interface is enabled.

The syntax for this command is:

[no] ip redirects

Example:

Router-1(config-if:marketing)#ip redirects

ip rip authentication key

User level: read-write, admin.

You can only access this command in interface mode.

54

Avaya C460 Reference Guide

Page 66
Image 66
Avaya C460 manual Router-1ip ospf router-id, Ip proxy-arp, Ip redirects, Ip rip authentication key