Chapter 2 Avaya C460 CLI Commands

show ip interface

User level: read-only, read-write, admin.

Use the show ip interface command to display information for an IP interface.

The syntax for this command is:

show ip interface [<interface-name>]<ip-address><vlan>]

interface-name

The name of the interface whose information you

 

want to display.

ip-address

The IP address of the interface whose information

 

you want to display.

vlan

The name or ID of the VLAN over which there are

 

interfaces you want to display.

Example:

 

Router-1>show ip interface Showing 2 Interfaces

mgmt is administratively up On vlan Default

Internet address is 10.49.54.14 , subnet mask is 255.255.255.0

Broadcast

address is 10.49.54.255

 

Directed broadcast forwarding is disabled

Proxy ARP

is disabled

 

baba is administratively down

 

On vlan v2

 

 

Internet address is 192.168.0.14

, subnet mask is

255.255.0.0

 

 

Broadcast

address is 192.168.255.255

 

Directed broadcast forwarding is disabled

Proxy ARP

is disabled

 

If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.

Avaya C460 Reference Guide

159

Page 171
Image 171
Avaya C460 manual Show ip interface, Router-1show ip interface Showing 2 Interfaces