Chapter 2 Avaya C460 CLI Commands
show ppp configuration
User level:
Use the show ppp configuration command to display the ppp configuration.
The syntax for this command is:
show ppp configuration
Example:
C460-1> show ppp configuration
PPP baud rate is 38400
PPPincoming timeout is 15 minutes PPP Authentication Parameters:
Incoming: None
show ppp incoming timeout
User level:
Use this show ppp incoming timeout command to display the amount of time in minutes that a PPP session can remain idle before being automatically disconnected.
The syntax for this command is:
show ppp incoming timeout
Example:
C460-1> show ppp incoming timeout
PPP incoming timeout is 15 minutes
show ppp session
User level:
Use the show ppp session command to display PPP parameters and statistics of an active PPP session.
The syntax for this command is:
show ppp session
Example:
C460-1> show ppp session
Avaya C460 Reference Guide | 201 |
