Avaya manual Show port dot1x, C460-1 show port dot1x 3/3

Chapter 2 Avaya C460 CLI Commands

show port dot1x

User level: read-only, read-write, admin.

Use the show port dot1x command to display all the configurable values associated with the authenticator port access entity (PAE) and backend authenticator.

The syntax for this command is:

show dot1x [mod]/[port]

mod		Number of the module.
(Optional)
port		Number of the port on the module, or range of ports.
(Optional)
Example:
C460-1>show port dot1x 3/3
Port	Auth	BEnd	Port	Port	Re	Quiet ReAuth Server Supp			Tx	Max
Number State		State	Control	Status Auth Priod Priod			Tmeout Tmeout Priod Req
------ -------- ------ -------- ------ ---- ----- ------ ------ ------ ----- ---
1/3	Init	Init	Auto	Unauth Disa		60 3600	30	30	30	2
module				Number of the module (3-6). If you do not
				specify a number, the ports on all the modules
				are shown.
port				Number of the port on the module. If you do
(Optional)				not specify a number, all the ports on the
				module are shown.
				You can also specify a range of ports
				separated by a dash, for example, 4/5-13 for
				ports 5 to 13 on module 4.
Auth State				The Port Access Entity state. Possible states
				include:
				•	Initialize
				•	Disconnected
				•	Connecting
				•	Authenticating
				•	Authenticated
				•	Aborting
				•	Held
				•	ForceAuth
				•	ForceUnauth

Avaya C460 Reference Guide 191