Chapter 2 Avaya C460 CLI Commands
ports.
The syntax for this command is:
set port negotiation <module>/<port> {enabledisable}
module | Number of the module |
| the ports on all the modules are configured. |
port | Number of the port on the module. If you do not specify a |
| number, the negotiation is set for all the ports on the module. |
| You can also specify a range of ports separated by a dash, for |
| example, |
enable | Enable port negotiation protocol |
disable | Disable port negotiation protocol |
Example:
To disable autonegotiation on port 1, module 4:
C460-1# set port negotiation 4/1 disable
Link negotiation protocol disabled on port 4/1.
set port point-to-point admin status
User level: read-write, admin.
Use the set port
The syntax for this command is:
set port
module | Number of the module |
| ports on all the modules are configured. |
port | Number of the port on the module. If you do not specify a number, |
| the negotiation is set for all the ports on the module. |
| You can also specify a range of ports separated by a dash, for |
| example, |
admin | |
status | |
| auto - try to automaticaly detect the connection type of the port |
112 | Avaya C460 Reference Guide |