Chapter 2 Avaya C460 CLI Commands

Example:

To set the time until the system disconnects an idle session automatically to 20 minutes:

C460-1#set logout 20

Sessions will be automatically logged out after 20 minutes of idle time.

set mac-aging

User level: privileged, supervisor.

This command is available on the P330-ML switches only.

Use the set mac-agingcommand to enable or disable the MAC aging function.

The syntax for this command is:

set mac-aging <status>

status

enable / disable

Examples:

C460-1#set mac-aging enable mac aging is enabled.

C460-1#set mac-aging disable mac aging is disabled.

set mac-aging-time

User level: privileged, supervisor.

This command is available on the P330-ML switches only.

Use the set mac-aging-timecommand to set the MAC aging time in minutes. This is the time after which unused MAC addresses in the MAC table are erased.

The syntax for this command is:

Set mac-aging-time <aging-time>

aging- Aging time in minutes (1 to 3600; default =5). time

Avaya C460 Reference Guide

95

Page 107
Image 107
Avaya manual C460-1#set logout, Set mac-aging status, Set mac-aging-time