Chapter 2 Avaya C460 CLI Commands

ip access-default-action

User level: read-write, admin.

If you are at the ”read-write” user level, you can only access this command in Configure mode.

Type configure at the command prompt to enter configure mode if necessary.

Use the ip access-default-actioncommand to set the default action for a specific policy list.

The syntax for this command is:

ip access-default-action<policy-list-number> <default- action>

<policy-list-number>

integer (100 to 149)

<default-action>default-action-denydefault-action-permit

Example:

C460-1(configure)#access-default-action 101 default- action-deny

ip access-group

User level: read-write, admin.

If you are at the ”read-write” user level, you can only access this command in Configure mode.

Type configure at the command prompt to enter configure mode if necessary.

Use the ip access-groupcommand to activate a specific policy list.

Use the no ip access-group command to deactivate the policy list.

The syntax for this command is:

[no] ip access-group<policy-list-number>[<default-action>]

<priority-list-number>

integer (100 to 149)

 

0 is the default list

<default-action>

default-action-denydefault-action-permit

Example:

C460-1(configure)# ip access-group 101

Avaya C460 Reference Guide

37

Page 49
Image 49
Avaya C460 manual Ip access-default-action, Ip access-group