Avaya manual C460-1show port mirror port mirroring, Show port point-to-point status

Chapter 2 Avaya C460 CLI Commands

Example:

C460-1>show port mirror port mirroring

--------------

Mirroring both Rx and Tx packets from port 3/2 to port 4/4 is enabled

C460-1>show port mirror port mirroring

--------------

No ports are mirrored

show port point-to-point status

User level: read-only, read-write, admin.

Use the show port point-to-point status command to show the port’s point-to-point admin and operational RSTP status.

The syntax for this command is:

show port point-to-point status <module/port>

module	Number of the module (3-6). If you do not specify a number, all
(Optional)	modules are shown.
port	Number of the port on the module. If you do not specify a
(Optional)	number, all ports on the specified module are shown.
Example:

C460-1>show port point-to-point status

Port	point-to-point admin state	point-to-point oper state
-------	----------------------------	--------------------------
1/1	auto	point to point connection
1/2	auto	point to point connection
1/3	auto	point to point connection
1/4	auto	point to point connection
1/5	auto	point to point connection
1/6	auto	point to point connection
1/7	auto	point to point connection

196 Avaya C460 Reference Guide