Avaya C460 manual Router-1#fragment size, Fragment timeout, Router-1#fragment timeout, Get time

Chapter 2 Avaya C460 CLI Commands

Example:

Router-1#fragment size 150

fragment timeout

Use the fragment timeout command to set the maximum number of seconds to reassemble a fragmented IP packet destined to the router. Use the no form of this command to set the fragment timeout to the default value (10).

The router does not perform reassembly of packets in transit.

The syntax for this command is:

[no] fragment timeout <timeout>

timeout	The maximum number of seconds to re-assemble an IP packet,
	from 5 to 120. The default is 10.

Example:

Router-1#fragment timeout 30

get time

Use the get time command to retrieve the time from the network.

The syntax for this command is:

get time

Example:

C460-1> get time

Time is being acquired from server 0.0.0.0

Time has been acquired from the network.

hostname

User level: read-write, admin.

Use the hostname command to change the Command Line Interface (CLI) prompt. The current module number always appears at the end of the prompt.

Use the no hostname command to return the CLI prompt to its default.

34 Avaya C460 Reference Guide