Chapter 2 Avaya C460 CLI Commands
set system location
User level:
Use the set system location command to set the mib2 system location MIB variable
The syntax for this command is:
set system location [string]
string | • | The location name string should be typed inside inverted |
|
| commas. |
| • | The location is cleared if you leave this field blank. |
Example: |
|
|
C460-1# set system location “tech-support”
*** Set system location ***
system location set
If you wish to enter a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.
set system name
User level: read-write, admin.
Use the set system name command to set the mib2 system name MIB variable.
The syntax for this command is:
set system name [string]
string | • | The system name string should be typed inside inverted |
|
| commas. |
| • | The name is cleared if you leave this field blank. |
Example: |
|
|
C460-1# set system name “C460-1”
*** Set system name ***
system name set
If you wish to enter a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.
Avaya C460 Reference Guide | 135 |
