Avaya manual Set port level, C460-1#set port level 3/1, Set port mirror

Chapter 2 Avaya C460 CLI Commands

set port level

User level: read-write, admin.

Use the set port level command to set the priority level of a port or range of ports on the switching bus. Packets traveling through a port set at normal priority should be served only after packets traveling through a port set at high priority are served.

The syntax for this command is:

set port level <module>/<port> [value]

module	Number of the module (3-6).
port	Number of the port on the module. If you do not specify a
	number, the level for all the ports on the module is set.
	You can also specify a range of ports separated by a dash, for
	example, 4/5-13 for ports 5 to 13 on module 4.
value	Priority level (0-7)
Example:

C460-1#set port level 3/1 5

Port 3/1 level set to 5

set port mirror

User level: read-write, admin.

Use the set port mirror command to define a port mirroring pair in the switch.

The syntax for this command is:

set port mirror source-port <module>/<port> mirror-port <module>/

<port> direction {<direction>

module	Number of the module (3-6).
port	Number of the port on the module.
always	Keyword to activate the port mirroring entry
disable	Keyword to change the status of the port mirroring entry to “not
	active”
direction	• rx – copy only incoming traffic
	• both– copy both incoming and outgoing traffic

110 Avaya C460 Reference Guide