Avaya C460 manual Router-1#rmon2 protocol-dist, Router ospf, No router ospf, Router rip

Chapter 2 Avaya C460 CLI Commands

application.

Use the no rmon2 protocol-distcommand to disable the application.

The syntax for this command is:

[no] rmon2 protocol-dist

Example:

Router-1#rmon2 protocol-dist

Done!

router ospf

User level: read-write, admin.

Use the router ospf command to enable the OSPF protocol on the system. Use the no router ospf command to disable the OSPF one the system. The default is disabled.

The syntax for this command is:

[no] router ospf

Example:

Router-1 (super) # router ospf

Done!

router rip

User level: read-write, admin.

If you are at the “read-write” user level, you can only access this command in Configure mode.

Type configure at the command prompt to enter configure mode.

Use the router rip command to configure the Routing Information Protocol (RIP). Use the no router rip command to disable RIP.

The default state is disabled.

The syntax for this command is:

[no] router rip

Example:

78 Avaya C460 Reference Guide