Chapter 2 Avaya C460 CLI Commands
secondary | Secondary authentication server |
Example:
set radius authentication udp-port
User level: read-write, admin.
Sets the RFC
Normally, the UDP port number should be set to its default value of 1812. Some early implementations of the RADIUS server used port number 1645.
The syntax for this command is:
set radius authentication udp-port <number>
Example:
C460-1(super)# set radius authentication udp-port number 1645
set slot power admin
User level: read-write, admin.
Use the set slot power command to power up or power down a slot. If there is a module in the slot, then the command will reset the device.
The syntax for this command is:
set slot power admin <slot> <status>
Slot | Slot number | |
Status | • | Up – power up the module |
| • | Down – power down the nodule |
126 | Avaya C460 Reference Guide |
