JVC GR-DVX509SH, GR-DVX509ED Make sure the camcorder’s power is off Open the card cover

EN 17

Loading A Memory Card /Unloading A Memory Card (GR-DVX709/509 only)

The provided memory card is already inserted in the camcorder at the time of purchase.

Card Cover

Clipped edge

Memory card

Label

1Make sure the camcorder’s power is off.

2Open the card cover.

3To load a memory card, firmly insert it with its clipped edge first.

To unload a memory card, push it once. After the memory card comes out of the camcorder, pull it out.

●Do not touch the terminal on the reverse side of the label.

4Close the card cover.

To protect valuable files (available only for SD Memory Card)…

Write/erase protection tab

Slide the write/erase protection tab on the side of the memory card in the direction of “LOCK”. This prevents the memory card from being recorded over. To record on this memory card, slide the tab back to the position opposite to “LOCK” before loading it.

NOTES:

●Be sure to use only SD Memory Cards marked

“ ” or MultiMediaCards marked

“”.

●Some brands of memory cards are not compatible with this camcorder. Before purchasing a memory card, consult its manufacturer or dealer.

●Before using a new memory card, it is necessary to FORMAT the card. ( pg. 36)

ATTENTION:

Do not insert or remove the memory card while the camcorder is turned on, as this may cause the memory card to be corrupted or cause the camcorder to become unable to recognise whether or not the card is installed.