EN 83
Master Page: Right
GR-DVX709SH_80-103.fm Page 83
Video and D.S.C.(GR-DVX709/509 only) Playback
6. During recording, sound
cannot be heard.
6. •The optional headphones are
not connected to the
headphones connector.
(GR-DVX709 only)
•The sound volume of the
headphones connector
(GR-DVX709 only) was not
adjusted appropriately. The
sound volume at this point is
the same as the level it was
adjusted to during playback.
6. •Connect the optional
headphones to the
headphone connector
(GR-DVX709 only).
(pg.95)
•Adjust the sound volume
during playback. (pg.22)
7. The LCD monitor or
viewfinder indications blink.
7. •Certain Wipe/Fader effects,
certain modes of Program AE
with special effects, “DIS”
and other functions that
cannot be used together are
selected at the same time.
7. •Re-read the sections covering
Wipe/Fader effects, Program
AE with special effects and
“DIS”. (pg.38, 40–
43,46)
8. Digital Zoom does not work. 8. •10X optical zoom is selected.
•The VIDEO/MEMORY
Switch is set to “MEMORY”.
8. •Set “ZOOM” to “40X” or
“200X”. (pg.44)
•Set the VIDEO/MEMORY
Switch to “VIDEO”.
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
9. Play, Rewind and Fast-Forward
functions do not work.
9. •The Power Switch is set to
A” or “M”.
VIDEO/MEMORY Switch is
set to “MEMORY”.
9. •Set the Power Switch to
P”. (pg.22)
•Set the VIDEO/MEMORY
Switch to “VIDEO”.
10. The LCD monitor image is
distorted.
10. •During playback of the
unrecorded portion, High-
speed Search and still
playback, LCD monitor
indications appear distorted.
This is not a defect.
10.
11. The tape is moving, but there is
no picture.
11. •Your TV has AV input
terminals, but is not set to its
VIDEO mode.
•The cassette holder cover is
open.
11. •Set the TV to the mode or
channel appropriate for
video playback.
(pg.24, 25)
•Close the cassette holder
cover. (pg.16)
12. Blocks of noise appear during
playback, or there is no
playback picture and the
screen becomes blue.
12.
12. •Clean the video heads with
an optional cleaning
cassette. (pg.91)
13. A memory card cannot be
played back.
13. •The Power Switch is set to
A” or “M”.
•The VIDEO/MEMORY
Switch is set to “VIDEO”.
13. •Set the Power Switch to
P”. (pg.28)
•Set the VIDEO/MEMORY
Switch to “MEMORY”.
CONTINUED ON NEXT PAGE
GR-DVX709SH_80-103.fm Page 83 Saturday, February 23, 2002 6:15 PM