JVC GR-DVX509SH, GR-DVX509ED 62 EN, For GR-DVX709 Owners, To use this camcorder as a player

62 EN DUBBING

Dubbing To Or From A VCR

To AV

To S-VIDEO

Connector

Covers**

[To use this camcorder as a player]

1	Following the illustrations, connect the
	camcorder and the VCR. Also refer to pages 24
2	and 25.
	Set the camcorder’s VIDEO/MEMORY Switch to
3	“VIDEO”. (GR-DVX709/509 only)
	Set the camcorder’s Power Switch to “P”
	while pressing down the Lock Button located on
4	the switch.
	Turn on the VCR’s power.
5	Insert the source cassette in the camcorder.
6	Insert the recording cassette in the VCR.
7	Engage the VCR’s AUX and Record-Pause modes.
8	● Refer to the instruction manual for the VCR.
	Press 4/9 on the camcorder to start playback of
	the source tape.

Audio/Video cable (provided)

To AUDIO,

VIDEO* IN

TVVCR

S-Video cable (optional)

To S-VIDEO IN

9 At the point you want to start dubbing, engage

the VCR’s Record mode.

10 To pause dubbing, engage the VCR’s Record-

Pause mode and press 4/9 on the camcorder.

11 Repeat steps 8 – 10 for additional editing. Stop

the VCR and camcorder.

NOTES:

● It is recommended to use the AC Adapter as the

power supply instead of the battery pack.

( pg. 11)

*Connect when an S-Video cable is not used.

**When connecting the cables, open these covers.

For GR-DVX709 Owners:

[To use this camcorder as a recorder]

1.Set the camcorder’s VIDEO/MEMORY Switch to “VIDEO”, then set the camcorder’s Power Switch to “P” while pressing down the Lock Button located on the switch.

2.Set “S/AV INPUT” to “ON” and set “REC MODE” to “SP” or “LP” ( pg. 51).

3.Connect the cables as shown in the illustration and load a cassette to record on.

4.Press the Recording Start/Stop button to engage

the Record-Pause mode. “ AV. IN ” appears on the screen.

5.Press the Recording Start/Stop button to start

recording. rotates.

6.Press the Recording Start/Stop button again to

engage the Record-Pause mode. stops rotating.

NOTES:

●After dubbing, set “S/AV INPUT” back to “OFF”.

●Analog signals can be converted to digital signals with this procedure.

●It is also possible to dub from another camcorder.

● As the camcorder starts to play your footage it will

appear on your TV. This will confirm the

connections and the AUX channel for dubbing

purposes.

● Before you start dubbing, make sure that the

indications do not appear on the connected TV. If

they do, they are being recorded onto the new

tape.

To choose whether or not the following displays

appear on the connected TV...

• Date/time

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.

( pg. 38, 49) Or, press DISPLAY on the remote

control to turn on/off the date indication.

• Time code

Set “TIME CODE” to “OFF” or “ON”.

( pg. 38, 49)

• Playback sound mode, tape speed and tape

running displays

Set “ON SCREEN” to “LCD” or “LCD/TV”.

( pg. 38, 49)