EN 65
Dubbing Still Images Recorded On A Tape To A Memory Card
Still images can be dubbed from a tape to a memory card.
Play/Pause Button (4/9)
VIDEO/MEMORY
Switch
Power Switch
Y OFF A | M |
PLA |
NOTES:
●If SNAPSHOT is pressed in step 8 when a memory card is not loaded, the message “COPYING FAILED” is displayed.
●If an image recorded on the tape using “WIDE MODE” ( pg. 46) is dubbed to a memory card, the WIDE mode identifying signal is not dubbed with it.
●To use Playback Special effects with a video image you wish to dub, perform up to step 8 using the remote control (provided). ( pg. 69)
●Images are dubbed in 640 x 480 pixels.
|
|
|
|
|
|
|
|
SNAPSHOT Button | Lock Button | ||
MENU Wheel |
|
| |
1Load a cassette. ( pg. 16)
2Load a memory card. ( pg. 17)
3Set the VIDEO/MEMORY Switch to “VIDEO”.
4Set the Power Switch to “P” while pressing down the Lock Button located on the switch.
5 | Set “ | COPY” |
|
|
| to “ON”. |
|
|
|
6 | ( pg. 38, 51) |
|
| |
Press 4/9 to start | COPY | – OF F | ||
| ON | |||
7 | playback. |
|
|
|
At the point you want |
|
| ||
| to dub, press 4/9 |
|
| |
| again to engage Still |
|
| |
8 | Playback. |
|
|
|
To dub the image, |
| SP | ||
| press SNAPSHOT. |
|
| |
| ● The ” | ” indication |
|
|
blinks during dubbing.
● The selected image is stored in the memory card.
