Sunfire Radio manual On Screen Display OSD, Chapter, Video Connections, OSD Activation

CHAPTER 4

On Screen Display (OSD)

Video Connections

The On Screen Display (OSD) is present at the composite video or S-video MAIN outputs, and the component video MAIN and MON outputs. It is also present at the output labeled VID2/MON2, but only if it is set to MON2. This is set in the OSD Video menu (see page 37). Make sure that your TV monitor's video input is connected correctly to one of these outputs.

OSD Activation

The OSD is activated using the remote's MENU button (with the remote set to operate the Ultimate Receiver).

The joystick pad and surround- ing buttons allow you to navigate through the OSD menus to control and customize many features of the Receiver.

Press EXIT to quit the OSD at any time. Any changes you make will be saved.

Note that the Receiver front panel display shows abbreviated text when the OSD is activated.

MAIN	MON2	MAIN		MON2
AUDIO/VIDEO OUTPUTS		COMPONENT VIDEO IN	COMPONENT OU		No OSD from:
					• VCR outputs
MAIN	VCR VID2/MON2	DVD SAT VID1	MAIN	MON2
			Y		• VID2/MON2 set to VID2
MAIN	VCR VID2/MON2		Cr

Cb

MAIN VCR VID2/MON2

DIGITAL AUDIO INPUTS

DVD SAT VID1 CD DVD

CD

GUIDEMENU

MODE MODE

Quick Information

		Pressing INFO at any time will
EXIT	INFO	bring up a short description of the
		source you are listening to. For
		example if you are listening to a
		DVD, the TV display might show:

DVD DIGITAL 48K

DOLBY EX 5.1 / 5.1 where:

DVD is the selected input, DIGITAL is the signal type, 48K is the sample rate, DOLBY EX is the mode, 5.1 is the input format,

5.1 is the output (i.e. Þve speakers and a subwoofer).

30

User's Manual