Sunfire Radio manual Speaker Position Menu

CHAPTER 4

Speaker Position Menu

	MAIN MENU
TRIMS
MODES
TONE
INPUTS			SETTINGS
SETTINGS
		MAIN ZONE
		ZONE 2			SPEAKERS
		SPEAKERS
		VIDEO
				SIZE
		SOFTWARE
				POSITION
		CONTROL
				CALIBRATION
		AMPLIFIER
				L-R CROSSOVER		110 HZ
				C-SURR CROSSOVER		90
Speaker Position				SUBWFR MODE		NORMAL

This menu allows you to enter the distance from your listening position to the various speakers. The Receiver will then automatically adjust and correct the speaker delay times. The sound from each speaker should ar- rive at the listener at the correct time. The distance measurement is not criti- cal, and a visual estimate is usually adequate.

The procedure is as follows:

1.Measure or visually estimate (in feet) how far each speaker is away from the center listen- ing position of your home theater.

2.In the OSD menu, use the remote control joystick arrow buttons to enter the distance in

feet for each speaker.
	SPEAKER	DISTANCE
3. The Receiver automatically
	LEFT MAIN/SIDE
sets the appropriate delays for
	RIGHT MAIN/SIDE
each speaker, so the sounds
	CENTER
arrive at the listening position
at the correct time.	LEFT SURROUND
4. Use this table to record your	RIGHT SURROUND
speaker distance measure-	LEFT SURR BACK
ments.	RIGHT SURR BACK

SPEAKER POSITION

L MAIN/SIDE	4	ft 6in
R MAIN/SIDE	4	ft 6in
CENTER	3	ft 0in
L SURR	4	ft 0in
R SURR	4	ft 0in
L SURR BACK	5	ft 0in
R SURR BACK	5	ft 0in

39

User's Manual