Sunfire Radio manual Chapter, Digital audio and component video connections

CHAPTER 2

Digital audio and component video connections

Component video signals

from Receiver Component video outputs to TV Monitor's Component video inputs

FM 75 Ω

S	DVD	AUDIO/VIDEO		INPUTS
		SAT	VID1
VIDEO				VID2	VCR		AUDIO/VIDEO		OUTPUTS
						CD
							MAIN	VCR
									V
									ID2/MON2
COMP	DVD	SAT
VIDEO			VID1	VID2
					VCR	CD
							MAIN	VCR

	Made in
		Snohomish,
COMPONENT		VIDEO IN	Washington,		U.S.A.
DVD	SAT			COMPONENT
		VID1					TRIGGERS
				MAIN OUT		MON2		RIGHT
							12VDC	SURROUND	RIGHT
			Y						MAIN

CENTER

LEFT	LEFT
MAIN

GND AM

VID2/MON2

DVD

SAT

VID1

VID2

L

VCR

CD

MAIN

VCR

VID2/MON2

L

R

AUDIO

INPUTS

R

PHONO

AUDIO

DAT

TAPE

OUTPUTS

L

DAT

8-CHANNEL

TAPE

LEFT

INPUTS

L SUR

L

CEN

LB SUR

R

R

PHONO

DAT

TAPE

DAT

TAPE

RIGHT

R SUR

SUB

RB SUR

				Cr
				Cb
DIGITAL
		AUDIO
DVD		SAT	INPUTS
			VID1	CD
STEREO		OUTPUTS
FIXED
	MAIN ZONE2			LEFT
			L
			R
FIXED
	MAIN ZONE2			RIGHT

	MAIN ZONE		12VDC
	ZONE2
				SPEAKER
					LEVEL
DVD							AUDIO	OUTPUTS
	SAT						Sunfire
			VID1						RS-232
					Ultimate
CD						D	Receiver II
	DAT		VID2				IGITAL OUT		IEEE
LINE LEVEL		AUDIO							1394
LEFT SUR			OUTPUTS
	CENTER
			SUB2	LB	SUR		SIDES
						L			I R
							SIDE AXIS
									MAIN
									REPLACE WITH		ORIGINAL
									FUSE TYPE
										AND RATING
RIGHT SUR		SUB1
			SUB3
				RB
							R
					SUR
							SIDE AXIS		ZONE2
									AC FUSE

		SURROUND
RIGHT	SURROUND
		BACK	LEFT
		OPTION
		SIDE-
		OR
		ZONE2
	AC INPUT
120 VAC		60 Hz

Component video signals
From: DVD Player component	Digital audio signals
video outputs	From: DVD Player coaxial
To: Receiver DVD component	digital audio outputs
video inputs	To: Receiver DVD coaxial
	digital audio inputs

16

If your DVD and TV Monitor both have component-video, they can be connected as shown, giving a supe- rior picture. Note that the OSD is not available with component video.

The digital output from the DVD player must be connected to the digital inputs of the Receiver. This is the only way the Receiver can receive and decode Dolby Digital or DTS sig- nals. It is best to use a coaxial digital cable to make the connection to the Receiver, rather than a standard audio cable.

Note: you must also connect the player's two-channel audio outputs if you want it to play in Zone 2 when the Main Zone is playing a different source.

User's Manual